FS or Trade

[Captain Caveman]

I have a Sherwood reg as Described above but it will include the 2nd stage and octo with 2" plastic spg. This reg is made for cold water ( has the bleed system first stage. the reg 1st will drip small amounts of air bubbles to keep it from freezing up)also, it has the under arm 2nd stage hose routing. This is nice to keep the hose close to your body.
I've just out grown this reg and Im not interested in it anymore I need all DIN valves, The reg is up to date on services.
looking for
ATX50 or Tx50
Al 40 deco bottle
10w hid light ( its a shot):D
any other tech gear

[theskull]

Nothing wrong with a Sherwood as a stage reg. You can get a DIN converter for it.

theskull

[Captain Caveman]

I was told to stay way from the bleed system.

200$ obo I will get pics I for got to add no lp for octo. I will sell a new 7ft long hose for the prim

http://i234.photobucket.com/albums/ee303/captaincavemanpics/diving/eraseme004.jpg

http://i234.photobucket.com/albums/ee303/captaincavemanpics/diving/eraseme003.jpg

http://i234.photobucket.com/albums/ee303/captaincavemanpics/diving/eraseme002.jpg

http://i234.photobucket.com/albums/ee303/captaincavemanpics/diving/eraseme001.jpg

[Captain Caveman]

Bump. ok I will throw in a lp hose for the 2nd stage.

[mike b]

Sherwoods also work well for argon regs. As far as the bleed system goes, it is not as harmful as you may think, I use a Sherwood as an O2 reg without any issues.

[theskull]

Sherwoods also work well for argon regs. As far as the bleed system goes, it is not as harmful as you may think, I use a Sherwood as an O2 reg without any issues.

Yep, my Argon reg is a Sherwood. Wonder if that's cause you and I had the same tech instructor. Eh?

theskull

[Captain Caveman]

Well since im having a hard time selling this reg, If I do keep it, can it be o2 cleaned? And its yoke now but I want to switch it to din. Is there a din Conv kit for the older Sherwood Maximus regs? Also with the air bleed, Im sure its not going to loose its charge completely for lake diving were at 40min to 1 hour BT. Im sure it would matter if I stage the bottle over night, unles it leaks fast than there will be a problem.

[SLIM]

YOu should be able to get a DIN conversion for it. It might take some searching. I think TS and Mike B might be able to get you apart number. It can be O2 cleaned and depending on your time as a stage or Deco reg it shold work fine. If you plan to leave anything in a system over time, then yes I would use a differant first stage.

SLIM

[mike b]

DIN conversions are readily available for this reg. I dont have a part# off the top of my head but I will check on it.

[mike b]

Yep, my Argon reg is a Sherwood. Wonder if that's cause you and I had the same tech instructor. Eh?

theskull
That is very possible. :)